500 SCM Liquid-cooled IGBT electrolyser power supply
High Efficiency & Energy Leadership
Green & Grid-Friendly
Resilience in Harsh Environments
Smart & Adaptive Control
Product model :
HRP0500LProduct parameters :
500 m³/hHigh-Efficiency Topology: Combines AC-DC PWM rectifiers with DC-DC three-level IGBT converters, achieving peak efficiency ≥98% under low-voltage, high-current conditions, with 25% lower energy consumption compared to traditional solutions.
Ultra-High Current Output: Maximum output current up to 6,600A, compatible with electrolyzers of 500 Nm³/h and above, boosting single-unit hydrogen production by 30%.
Customizable Power: Modular power units support flexible configurations up to 2.5MW, meeting demands from laboratory-scale hydrogen production to large green hydrogen bases.
Multi-Strategy Control: Built-in constant current, voltage, and power control modes, precisely matching PEM, ALK, SOEC, and other electrolyzer technologies, with a voltage output range of 50–820Vdc.
Advanced Cooling System: Fully sealed liquid-cooled circulation design improves heat dissipation efficiency by 60%, enabling full-load operation at 45°C ambient temperature and extending component lifespan by 40%.
Robust Protection: IP54 protection rating, resistant to extreme environments including -35°C to +60°C temperatures, high humidity, salt spray, and sandstorms, validated by 1,000-hour salt spray corrosion testing.
Digital Monitoring: 7-inch industrial touchscreen displays real-time current, voltage, temperature, and 20+ parameters, with self-diagnostic fault detection and millisecond-level emergency shutdown.
Cloud Integration: Equipped with RS485/Ethernet interfaces, compatible with Modbus, CANopen protocols, and seamless integration with Energy Management Systems (EMS) for remote O&M and efficiency optimization.
⇒ Product Parameter
Product Parameter
|
product |
HRP0500L |
|||
|
hydrogen yield (m³/h) |
500 |
|||
|
AC input parameters |
AC voltage range |
500/600V ac |
||
|
Permissible grid |
±10% |
|||
|
voltage range |
||||
|
Rated grid frequency |
50/60Hz |
|||
|
Permissible grid |
±10% |
|||
|
frequency range |
||||
|
Power Factor |
≥0.99 |
|||
|
Power factor range |
0.9 leading~0.9 lagging |
|||
|
Current harmonic distortion |
≤3% |
|||
|
Access method |
3P3L + PE |
|||
|
DC output parameters |
Output Power |
2500kW |
||
|
Maximum Power |
110% maximum output |
|||
|
Electrolyser type |
High Voltage |
Low Voltage |
||
|
Low Current |
High Current |
|||
|
Maximum DC current (A) |
4400 |
6600 |
||
|
Maximum DC voltage (V) |
820 |
540 |
||
|
Current range |
0~Maximum output current |
|||
|
Voltage range |
0~Maximum output voltage |
|||
|
Current ripple |
≤1%-Ipp |
|||
|
Current accuracy |
≤0.5%×maximum current |
|||
|
Dynamic response |
≤100ms, slope can be set |
|||
|
Control method |
Constant current control |
|||
|
General |
Highest efficiency |
98% |
97.50% |
|
|
Dimensions (W×D×H mm) |
1360×1865×2305 |
|||
|
Protection level |
IP54 |
|||
|
Temperature range |
-35~60℃ |
|||
|
Humidity range |
0~95% No condensation |
|||
|
Fault recording and broadcasting diagnosis |
Including |
|||
|
Process interlocking |
Including |
|||
|
Communication interface |
RS485, Modbus RTU, Modbus TCP |
|||
|
Human-computer interaction interface |
10-inch touch screen interaction |
|||
|
Inport and outport |
Up in /Down out |
|||
⇒Application
Our hours
Mon 11/21 - Wed 11/23: 9 AM - 8 PM
Thu 11/24: closed - Happy Thanksgiving!
Fri 11/25: 8 AM - 10 PM
Sat 11/26 - Sun 11/27: 10 AM - 9 PM
(all hours are Eastern Time)